Hitachi c2844s Manuale Utente

ENGLISH - 4 -

Connect Peripheral Equipment

There is a wide range of audio and video equipment that can

be connected to your TV.
The following connection diagrams show you where the dif-

ferent equipment should be connected at the back or the front

side of the TV.

Via the Euroconnector

Your TV set has one or two Euroconnector socket. If you want

to connect peripherals (e.g. video, decoder, etc.) which have

Eurocon-nectors, to your TV, use EXT.1 and EXT.2 inputs.
If an external device is connected via Euroconnector sockets

TV is switched to AV mode automatically. If the signal is RGB

then the RGB OSD indicator is displayed on the screen.
In AV mode if you press the

button the TV status OSD is

displayed on the screen.

RGB mode

If an equipment can output the RGB signals, connect it to the

AV-1 (EXT.1) terminal.
Select the RGB mode to watch images from that equipment.
When not in the RGB mode, turn the RGB signals output

equipment off.

Via Ant Input

If you want to connect to your TV, peripherals like video record-

ers or decoders, but the device you want to connect does not

have Euroconnector, you should connect it to the ANT input of

your TV set.
If the VCR is connected via antenna input it is suggested

to use the Programme 0.

Decoder

Cable TV offers you a wide choice of programs. Most of them

are free, others are to be paid for by the viewer. This means

that you will need to subscribe to the broadcasting organisa-

tion whose programmes you wish to receive. This organisation

will supply you a corresponding decoder unit to allow the

programmes to be unscrambled.
For further information ask your dealer. See also the book-

let supplied with your decoder.

Connect a decoder with an aerial socket to the TV
Connect the aerial cable.
Connect a decoder without an aerial socket to the TV
Connect the decoder to your TV with a eurocable / RCA Jack

Cable to EXT.1 and EXT.2 / RCA Jack. When your decoder

has a Euroconnector / RCA Jack you can obtain better picture

quality if you connect a eurocable / RCA Jack Cable to EXTER-

NAL /RCA Jack.

TV and Video Recoder (VCR)

Connect the Video Recorder to the ANT (antenna input)

socket of the TV with the aerial cable.

Connect the Video Recorder to the AV-1 or AV-2 terminal with

the SCART cable, or connect it to the B-AV terminal with the

audio and video cables.

Playback NTSC

Connect NTSC VCR player to Euroconnector at the back of

the TV.
Then, press

button to select AV-1, AV-2, B-AV, RGB or

SVHS.

Copy Facility

Source selection for VCR recording.
Select Features Menu in the Main Menu.
Select AV-2 OUTPUT source pressing or button.

Search for and store the test signal of the

video recorder

Unplug the aerial cable from the aerial socket ANT of your

video recorder.

Switch on your TV and put the video recorder on the test sig-

nal. (See the handbook for your video recorder.)

Enter the Tuning menu via the Install menu.
Search for the test signal of your video recorder in the same

way as you searched for and stored the TV signals. See

Tuning, Search and Store TV channels. Store the test signal

under programme number 0.

Replace the aerial cable in the aerial socket ANT. of your

video recorder once you have stored the test signal.

Camera and Camcorder

To connect to Back-AV input (B-AV)
Connect your camera or camcorder at the back side of your TV.
Connect your equipment to the TV via VIDEO (yellow), AUDIO

R (red) and AUDIO L (white) inputs. You should connect the

jacks to the input in the same colour.

Back-AV output
Connect your camera or camcorder at the back side of your TV.
Connect your equipment to the TV via VIDEO, AUDIO R and

AUDIO L inputs. You should connect the jacks to the input in

the same colour. Back AV output outputs only the information

coming from the ANT. (aerial) socket, so you can not output

external sources from Back AV output.

SVHS (via EXT.2)

If the equipment connected to your TV set supports S-Video (Y/

C) output from Euroconnector, you can have a better picture

quality by selecting AV-2 mode and connecting your equipment

to the EXT.2 terminal of TV. See your equipment's booklet to

check if your equipment has such feature.

Connect the decoder to the video recorder

Some video recorders have a special euroconnector for de-

coder.
Connect a eurocable to the euroconnector of your decoder

and to the special eurocon-nector of your video recorder. See

also the handbook of your video recorder.

To connect your video recorder to the TV, see TV and Video

Recorder section.

If you want to connect more equipment to your TV, consult

your dealer.

ENG-(C2844S)-2850M-3040-AK37-ST1P-VST-50041887.p65

26.06.2003, 11:04