Honeywell RCWL210A Manuale Utente

•  Chime
•  Bell push
•  CR2032 battery for bell push
•  2 x screws for push
•  2 x wall plugs
•  Adhesive pad

You will need:

•  3 X LR14 C size 1.5V Alkaline

batteries

•  A #1 Philips-head screw driver
•  A small flat bladed screwdriver
•  A 1/4-in. (6 mm) drill bit

Safety
Before proceeding with the installation, please note the following safety warnings:

•  Always follow the manufacturer’s advice when using power tools and wear

suitable protective equipment (e.g. safety goggles) when drilling holes, etc.

•  Before drilling holes in walls, check for hidden electricity cables and water pipes.

The use of a cable/pipe locator is advisable if in doubt.

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat
such as sunshine, fire or the like; danger of damage if battery is incorrectly replaced.
Replace only with the same or equivalent type.

69-2112EFS_D.indd   1

12/10/2009   12:05:44 PM