Panasonic DP-C354 Guida Al Funzionamento
48
Configuring
the Printer Driver
Settings
Device Tab
Used for configuring optional devices installed on the printer.
If the printer is connected to the Network (TCP/IP), use
If the printer is connected to the Network (TCP/IP), use
Auto Configuration to configure the optional devices
installed on the printer or obtain information on the printer driver settings.
1.
Number of Paper Tray
Specifies the number of paper trays installed on
the device.
the device.
2.
Duplex Unit (Available for DP-C322/C262,
DP-C354/C264/C323/C263/C213 only)
DP-C354/C264/C323/C263/C213 only)
Select
Installed if a duplex unit is installed.
3.
HDD Unit
Select
Installed if a hard disk drive unit is
installed.
4.
Printer Memory (Available for DP-C322/C262,
DP-C354/C264/C323/C263/C213 only)
DP-C354/C264/C323/C263/C213 only)
Select and specify the total amount of memory
installed on the printer (standard + optional
memory).
installed on the printer (standard + optional
memory).
5.
Finisher (Not available for DP-8020P/8020E/
8016P)
8016P)
If the printer is equipped with a
Finisher, select
it from the list.
6.
Punch Unit (Not available for DP-8020P/
8020E/8016P)
8020E/8016P)
Select
Installed if a punch unit is installed.
7.
Auto Configuration
button
If the printer is connected to a Network (TCP/IP),
clicking this button will search for installed printer
options, which are automatically detected and
configured.
Note:
Make sure that your printer is connected on your
network properly (TCP/IP only).
The button is not selectable if the
Enable printer
pooling
is set to ON and multiple ports are selected
on the
Ports
tab.
(For DP-C322/C262, DP-C354/C264/C323/C263/C213)
(For DP-8060/8045/8035)