Denon HEOS HomeCinema Manuale Proprietario

If your wireless router support WPS (Wi-Fi Protected Setup™) your HEOS Wireless Speaker can optionally connect to your

network using the “Push Button” method by following these steps:

1. Press the WPS button on your router.

2. Within 2 minutes, rapidly press the Connect button 3 times (within 2 seconds of each press).

3. The LED on the front of the speaker will flash green for several seconds as it connects to your WPS router.

4. When the connection is complete, the LED on the front of the speaker will turn solid blue.

Resetting your speaker will clear out the wireless network info, EQ, and name but retain it’s current software. You will have to use

Settings - Add Speaker to reconnect the speaker to your home network before it can be used.

To reset your speaker, gently insert a small paperclip into the Reset button hole on the back of the speaker and hold it in until the

front LED begins to flash amber.

–

59