Extricom Ltd EXRP-20 Manuale Utente
The Extricom WLAN System User Guide
51
4.
Click Update to upgrade the firmware.
5.
Reboot the switch (refer to Rebooting the Extricom Switch on page 46).
The firmware upgrade file is GNU zipped (gzip). Some Internet browsers are
configured to automatically unzip files when downloading. Verify that this option is
disabled so that the upgrade file remains zipped after downloading.
configured to automatically unzip files when downloading. Verify that this option is
disabled so that the upgrade file remains zipped after downloading.
Rebooting the Extricom Switch
You must reboot the switch to activate any changes you make to the switch configuration.
To reboot the Extricom switch:
1.
In the Reboot Switch section of the Utilities configuration page, click Reboot.
2.
A new screen opens, prompting you “Are you sure you want to reboot?”.
3.
Click Reboot to reboot.
Reconfigure Switch - Smart Configuration
Not every change in the Extricom switch’s configuration requires system reboot. Some parameters
can be changed and will take effect immediately. This button checks whether a full reboot is
required. In case reboot is not required, the update will take effect immediately.
can be changed and will take effect immediately. This button checks whether a full reboot is
required. In case reboot is not required, the update will take effect immediately.
Setting the Time and Date
Extricom system supports two ways of setting Date and Time (refer to Figure 28)
To manually set the time and date on your Extricom Switch:
1.
In the Set Time & Date tab of the Utilities configuration page, select Manually.
2.
Enter the time and date in the format hh:mm:ss dd-mm-yy.
3.
Click Update to save the configuration.
To set the time and date on your Extricom Switch using NTP protocol:
1.
In the Set Time & Date section of the Utilities configuration page, enter the time and date in the
format hh:mm:ss dd-mm-yy.
format hh:mm:ss dd-mm-yy.
2.
Click Update to save the configuration.