Mitel Deutschland GmbH 68635RFP36U-01 Manuale Utente
Configuration and Administration
289
For specific maintenance purposes only, SIP-DECT allows configuration of a URL via the OMM Web
service or OMP to use an alternative DECT phone software image (see section 5.4.1.6). The Mitel 600
DECT phone firmware packages are delivered in the “600.dnld” file for the OMM running on an RFP.
service or OMP to use an alternative DECT phone software image (see section 5.4.1.6). The Mitel 600
DECT phone firmware packages are delivered in the “600.dnld” file for the OMM running on an RFP.
7.22.1 HOW “DOWNLOAD OVER AIR” WORKS
If the “Download over Air” feature is activated (see section 5.4.1.6), the OMM acts as a download server
that provides the firmware for downloads.
that provides the firmware for downloads.
The DECT phone sends its firmware version within the DECT attachment procedure. If the firmware
version does not match the version provided by the OMM, the DECT phone will be queued into the
update-queue. Later on the queued DECT phones will be paged to establish a download connection.
After the connection is established, the OMM sends its actual DECT phone firmware version and the
DECT phone will request a DECT phone description file. After receiving the DECT phone description file,
the DECT phone decides which files are missing or must be updated. If files are missing or must be
updated the DECT phone initiates the download procedure.
version does not match the version provided by the OMM, the DECT phone will be queued into the
update-queue. Later on the queued DECT phones will be paged to establish a download connection.
After the connection is established, the OMM sends its actual DECT phone firmware version and the
DECT phone will request a DECT phone description file. After receiving the DECT phone description file,
the DECT phone decides which files are missing or must be updated. If files are missing or must be
updated the DECT phone initiates the download procedure.
The OMM takes care of the following download scenarios automatically:
•
If a DECT phones becomes unreachable e.g. when the DECT phone is switched off, the OMM will
update the DECT phone when the DECT phone becomes available again.
•
The OMM will take care of the software download while the user is moving between base stations
(roaming) and location areas.
•
The OMM has the capability of resuming a download from the point where it was last interrupted (e.g.,
the user leaves the coverage area during download or the DECT phone runs out of battery power).
•
The OMM updates new DECT phones subscribed to the system.
•
While the DECT phone is barred (e.g. low battery or “Download over Air“ is disabled at the local
menu), the download will be postponed.
The download happens without any user intervention. During the download, the telephony services, the
roaming- and handover procedures are still available. The download stops automatically when e. g. the
DECT phone leaves the coverage area or the RFP gets busy. The download resumes automatically
when the stop cause is solved.
roaming- and handover procedures are still available. The download stops automatically when e. g. the
DECT phone leaves the coverage area or the RFP gets busy. The download resumes automatically
when the stop cause is solved.
The Mitel 600 DECT phones have two partitions in the internal flash memory to hold 2 different software
versions. During the download the new firmware is written to one partition and the DECT phone is
running from the other partition.
versions. During the download the new firmware is written to one partition and the DECT phone is
running from the other partition.
After the download is successfully completed, the new firmware will be activated when the DECT phone
is in the idle state.
is in the idle state.
The download of a single DECT phone with a firmware of 1 MB takes approximately 90 minutes. The
number of DECT phones which can be downloaded depends on the available system resources.
number of DECT phones which can be downloaded depends on the available system resources.
The number of simultaneous downloads is limited per OMM (RFP: 30, PC: unlimited) and per RFP (6,
decreased with each call).
decreased with each call).
The “Download over Air” service is delayed after a system startup for a while to allow the whole DECT
system to become active. This may last several minutes.
system to become active. This may last several minutes.
7.22.2 HOW TO CONFIGURE “DOWNLOAD OVER AIR”
This section describes configuration of the “Download Over Air” feature via the OM Web service. The
feature can also be configured using the OM Management Portal (OMP).
feature can also be configured using the OM Management Portal (OMP).