Mitel Deutschland GmbH 68635RFP36U-01 Manuale Utente
SIP-DECT OM System Manual
312
Precondition: A DECT phone must be assigned to the user (fixed, logged in). The DECT phone is
subscribed and attached (at least once).
subscribed and attached (at least once).
7.29.2.5 SIP User Registration Status (SRS)
The user must be successfully registered at the configured SIP registrar otherwise the status is
“Unavailable”.
The user must be successfully registered at the configured SIP registrar otherwise the status is
“Unavailable”.
A SIP registration is initiated automatically by the OMM during start-up if the user’s DECT phone was
attached to the DECT system before restart/failover.
attached to the DECT system before restart/failover.
The SIP registration will not initiated automatically by the OMM during start-up if
•
the user has no assigned DECT phone (fixed user device relation, login),
•
the DECT phone is not subscribed or
•
the DECT phone was detached (e.g. switched off) before restart/failover.
A user will be deregistered if
•
the DECT phone subscription is deleted/terminated,
•
the user logs off from a DECT phone or
•
the DECT phone is detached (e.g. switch off).
Precondition: A DECT phone must be assigned to the user (fixed, logged in). The DECT phone is
subscribed and attached (at least once).
subscribed and attached (at least once).
7.29.2.6 Silent Charging Status (SCS)
If silent charging is enabled and the DECT phone is put into the charger, the DECT phone is in silent
charging mode and does not indicate incoming calls with an audible signal. The DECT phone must not
be in silent charging mode otherwise the status is “Unavailable”.
Precondition: A DECT phone must be assigned to the user (fixed, logged in). The DECT phone is
subscribed and attached/signed in to the DECT system.
If silent charging is enabled and the DECT phone is put into the charger, the DECT phone is in silent
charging mode and does not indicate incoming calls with an audible signal. The DECT phone must not
be in silent charging mode otherwise the status is “Unavailable”.
Precondition: A DECT phone must be assigned to the user (fixed, logged in). The DECT phone is
subscribed and attached/signed in to the DECT system.
7.29.2.7 Call Diversion Status (CDS)
The user has no immediate call diversion (unconditional call forwarding) configured otherwise the status
is “Unavailable”.
The user has no immediate call diversion (unconditional call forwarding) configured otherwise the status
is “Unavailable”.
If the user has configured a call diversion for “No answer” / “Busy no answer” with a forward time ‘0’, this
will be handled by user monitoring like unconditional call forwarding.
Precondition: The user must exist in the OMM database. The SIP supplementary service “Call
forwarding / Diversion” is enabled in the OMM (see pages 72 and 144).
will be handled by user monitoring like unconditional call forwarding.
Precondition: The user must exist in the OMM database. The SIP supplementary service “Call
forwarding / Diversion” is enabled in the OMM (see pages 72 and 144).
7.29.2.8 Handset Battery Status (HBS)
The battery level of the DECT phone must be greater than the configured threshold value; otherwise the
status is set to “Warning”.
The battery level of the DECT phone must be greater than the configured threshold value; otherwise the
status is set to “Warning”.