Mitel Deutschland GmbH 68635RFP36U-01 Manuale Utente
SIP-DECT OM System Manual
316
7.29.7.2 “DECT Phones” Menu
The following parameter can be configured on user level.
Monitoring mode: The user monitoring mode can be set to Off, Passive or Active. Off disables user
monitoring.
Monitoring mode: The user monitoring mode can be set to Off, Passive or Active. Off disables user
monitoring.
Passive and Active enable user monitoring and control the mode of the DECT phone
activity status supervision. Default setting is
Off.
If user monitoring is activated, the
VIP option in the DECT Phones -> Users -> SIP tab for the user will
be set automatically (see page 188). The
VIP option will not be reset if the user monitoring mode is set to
“Off”.
7.29.7.3 “DECT Phones -> User monitoring” Menu
The status of all monitored users is presented by the OMM in the
The status of all monitored users is presented by the OMM in the
DECT Phones -> User monitoring
menu.
7.29.7.4 User Configuration Files
The parameter “UD_UserMonitoring” controls the monitoring for a user. The parameter can be set to
“Off”, “Passive”, or “Active”.
The parameter “UD_UserMonitoring” controls the monitoring for a user. The parameter can be set to
“Off”, “Passive”, or “Active”.
7.29.7.5 OM IMA Application
If messages shall be sent out by the OM IMA application, the administrator must configure appropriate
alarm scenarios for the alarm triggers in the OM IMA configuration file:
If messages shall be sent out by the OM IMA application, the administrator must configure appropriate
alarm scenarios for the alarm triggers in the OM IMA configuration file:
•
UMON-OK-USERSTATE
•
UMON-WARN-USERSTATE
•
UMON-ERR-USERSTATE
7.29.8 START AND FAILOVER
The availability status is set to “Unknown” at start-up.
The monitoring feature does not escalate any user status during start-up until a configurable delay of
min. 2 minutes and max. 15 minutes has elapsed.
min. 2 minutes and max. 15 minutes has elapsed.