Agrident Corporation AWR100 Manuale Utente

08/10/2007 

Vertraulich / Confidential 

Page 14 of 31 

 

 

 

 

 
 
On the first Line of the LCD display, the transponder number is displayed in decimal format. 
On the second Line of the LCD display, time and transponder type are displayed. 
 
 
 
 
 
If an event is assigned to the read transponder (at this time only 30 transponders can be as-
signed to an event), the event and the time are displayed alternating in the second line of the 
LCD display. 
 
 
 
 
 
 
 
 
 
Transponder data plus time and event will be transmitted to the PC via serial interface or Blue-
tooth and can be displayed there. 
Simultaneously transponder ID and time are stored in the internal database of the Stick Reader 
(without event).  
If the key is pressed, while an event is detected, the string "ok" appears after the event string. 
Data will be transmitted to the PC again. 

 
 
 
 
If no event is assigned, the data are displayed for approximately seven seconds if the key is not 
pressed.  
After displaying transponder data the ready to work text appears again: 
 
 
 
 
 
 

Press key until text 
 
 
 
 
 
 
appears on the LCD display. 
Reading procedure is similar to chapter 4.2.1. 
 

After message 
 
 
 
 
 
appears on the LCD display, the menu of the Stick Reader can be entered by double pressing 
the read button. At first the status information's of the Stick Reader are displayed.