Agrident Corporation AWR100 Manuale Utente

08/10/2007 

Vertraulich / Confidential 

Page 18 of 31 

 

 

 

 

The configuration of the Stick Reader can be reset to the factory settings by pressing the read 
button.    
After a successful resetting of the configuration 
 
          
 
 
 
appears on the second line of the LCD display for a certain time. 
 
 

The Stick Reader provides an online- and an offline mode. In online mode transponder data are 
transmitted immediately via RS232 interface or Bluetooth. In offline mode transponder data are 
only stored in the database of the Stick Reader but not transmitted. 
If the Stick Reader is in online mode, the following text appears on the second line of the LCD 
display: 
 
 
 
 
 
If the Stick Reader is in offline mode, the following text appears on the second line of the LCD 
display: 
 
    
 
 
 
The mode could be changed by pressing the read button. 
 

It is possible to separate groups of transponders by inserting a new group pattern in the data-
base of the Stick Reader. In this case the Stick Reader stores a zero transponder at the current 
position of the database and the animal counter is automatically reset to zero. 
For this option the following text appears on the second line of the LCD display: 
 
 
 
 
 
 
A new group is inserted by pressing the read button. 
 

With this option it is possible to show up to three last read transponders after Stick Reader was 
switched on. 
For this option the following text appears on the second line of the LCD display: 
 
 
 
 
 
The feature is started by pressing the read button. 
If no transponders were read after switching on the Stick Reader the following text appears on 
the second line of the LCD display: