SMC Networks D3GN301 Manuale Utente

錯誤! 尚未定義樣式。 

54 

SMCD3GN2 Wireless Cable Modem Gateway Administrator Manual 

The following procedure describes how to change the settings in the Ether Switch Port 
Control menu. 

1.  To change a port from auto-negotiation to a fixed speed and duplex setting: 

a. Uncheck the Auto check box for the port. 

b. Under Speed (10/100/1000), click the radio that corresponds to the fixed speed you 

want to use for that port. 

c. Under the Mode H/F column, leave the check mark for full-duplex mode or uncheck it 

for half-duplex mode. 

2.  To disable a port, regardless of the auto-negotiation and duplex settings, uncheck Enable 

for the port. 

3. Click Apply.  

Using the LAN Access Control menu, you can: 

y 

Allow all EtherLAN client stations to access the Internet through the Gateway. This is the 
default setting. 

y 

Allow certain trusted EtherLAN client stations to access the Internet through the 
Gateway. You use the add up to 16 trusted clients. 

y 

Deny certain trusted EtherLAN client stations from accessing the Internet through the 
Gateway. You use the add up to 16 untrusted clients. 

To access the LAN Access Control menu, click LAN in the menu bar and then click the 
Ether Access Control submenu in the menu bar. Figure 26 shows an example of the menu.