SMC Networks D3GN301 Manuale Utente

錯誤! 尚未定義樣式。 

95 

SMCD3GN2 Wireless Cable Modem Gateway Administrator Manual 

SSID 

Network name of the primary wireless carrier. 

MAC Filtering Mode 

Determines which wireless client stations can connect to the Gateway. The choices are: 

• 

Allow- All = all wireless client stations can connect to the Gateway. (default) 

• 

Allow = allow only the wireless client stations in the MAC filter table to connect to the Gateway. 

• 

Deny = no wireless client stations can connect to the Gateway. 

Wireless Control List 

Shows the device name and MAC address of up to 16 devices that you manually added to the MAC filter 

table. To delete a device, click the radio button to the left of the device you want to delete and click the 

Delete button. A precautionary message does not appear before deleting the MAC address, so be sure 

you do not need the MAC address before deleting it. 

Auto-Learned Wireless 

Devices 

Shows the wireless devices whose presence the Gateway has automatically learned.  

Manually-Added 

Wireless Devices 

Enter a unique name and MAC address of the wireless devices that you want to manually add to the 

Wireless Control List (MAC filter table). Click Add to add the device to the Wireless Control List. 

To allow wireless client stations to access the Internet through the Gateway, use the 
following procedure to define up to 16 wireless client stations. 

1.  To add wireless client stations that the Gateway automatically learned on the network, 

perform the following steps under Auto-Learned Lan Devices: 

a.  Click a wireless client station that the Gateway learned automatically. 

b. Click Add. The wireless client station is added to the Wireless Control List. 

c.  To add more auto-learned wireless client stations (up to 16), repeat steps 1a and 1b. 

2.  To manually add wireless client stations, perform the following steps under Manually-

Added Wireless Devices: 

a. Under Device Name, enter a unique name for the device (that is, a name that does not 

already appear in the Wireless Control List). 

b. Under MAC Address, enter the MAC address of the device. 

c. Click Add to add the wireless client station to the Wireless Control List. 

d.  To manually add more wireless client stations (up to 16), repeat steps 2a through 2c. 

3.  To delete wireless client stations from the Wireless Control List, click the radio button 

corresponding to the wireless client station you want to delete and click the Delete button. 
A precautionary message does not appear before deleting a wireless client station. 

4.  When you finish, click Apply.