Altronix AL400ULPD4CB Dépliant

Rev. DSAL400ULPD4 - B10F

• Fuses are rated @ 3.5 amp/250V.
• Grey enclosure.

• Red enclosure.

• PTC’s are rated @ 2.5 amp.
• Grey enclosure.

• Red enclosure.

• These multi-agency approved multi-output power supply/chargers convert a 

115VAC/60Hz input into four (4) Class 2 Rated 12VDC or 24VDC power 
limited outputs. 

• 12VDC or 24VDC selectable outputs. 
• 12VDC @ 4 amp or 24VDC @ 3 amp supply current.
• Class 2 Rated power limited outputs.
• Four (4) protected outputs.
• Input 115VAC / 60Hz, 1.45 amp.
• Input fuse rated @ 3.5 amp/250V.
• Filtered and electronically regulated outputs.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid 

or gel type batteries.

• Maximum charge current .7 amp.
• Automatic switch over to stand-by battery when

AC fails (zero voltage drop).

• AC fail supervision (form "C" contacts). 
• Low battery supervision (form "C" contacts). 
• Battery presence supervision (form “C” contacts).
• AC input and DC output LED indicators.
• Enclosure:

- Combination knockouts are 1/2” and 3/4”
- Accommodates up to two (2) 12VDC/7AH batteries.

• Product weight: 

- AL400ULPD4: 7.4 lbs.
- AL400ULPD4CB: 7.5 lbs.

• Shipping weight: 

- AL400ULPD4: 8.4 lbs.
- AL400ULPD4CB: 8.5 lbs.

CUL Listed - CSA Standard C22.2 
No.205-M1983, Signal Equipment.

UL 294

UL Listed for Access Control 
System Units.

UL 603

UL Listed Standard for Power 
Supplies for Use with Burglar-
Alarm Systems.

UL 1069 UL Listed Hospital Signaling and

Nurse Call Equipment.

UL 1481 UL Listed Standard for Safety for

Fire Protective Signaling Systems.