Altronix AL1024ULXPD16 Dépliant

UL 294 

UL Listed for Access Control  

 

System Units.

UL 1481  UL Listed Standard for Safety for
 

Fire Protective Signaling Systems.

•  Input 115VAC / 60Hz, 4.4 amp.
•  Input fuse rated @ 3.5 amp/250V.

•  24VDC output.
• 10 amp of continuous supply current for
 Access Control applications.
•  8 amp of continuous supply current for 
 Fire Alarm applications.
•  Sixteen (16) fuse protected outputs.
•  Output fuses are rated @ 3.5 amp/250VAC.
•  Filtered and electronically regulated output.
•  Short circuit and thermal overload protection.

•  Built-in charger for sealed lead acid or
 gel type batteries.
•  Automatic switch over to stand-by battery
 when AC fails.
•  Maximum charge current 3.6 amp.

•  AC fail supervision (form “C” contacts).
•  Low battery supervision (form “C” contacts).
•  Battery presence supervision (form “C” contacts).

•  AC input and DC output LED indicators.

•  Operating temperature: 0º C to 49º C ambient.
•  45-91 BTU/Hr.:
•  System AC input VA requirement: 506VA.

•  Enclosure Dimensions (H x W x D approx.):
 15.5” (393.7mm) x 12” (304.8mm) x 4.5” (114.3mm)
 -  Accommodates up to two (2)12VDC/12AH batteries.
•  Product weight (approx.): 10.1 lbs. (4.58 kg.).
•  Shipping weight (approx.): 11.4 lbs. (5.17 kg.).

AL1024ULXPD16 is a multi-agency approved multi-output power
supply/charger which converts a 115VAC/60Hz input into sixteen (16)
24VDC non-power limited outputs.

Rev. DSAL1024ULXPD16_01062012

AL1024ULXPD16

CUL Listed - CSA Standard C22.2
No.205-M1983, Signal Equipment.