Altronix AL400UL3X Dépliant

Rev. DSAL400UL3X - A26F

• This Altronix power supply converts a 115VAC 60Hz input into three (3) 

individually regulated power limited outputs.

•  5VDC, 12VDC or 24VDC simultaneous output.
•  1.75 amp @ 5VDC and 12VDC, and 

1.5 amp @ 24VDC supply current.

• Class 2 Rated power limited output.
• Input 115VAC / 60Hz, 1.45 amp.
• Input fuse rated @ 3.5 amp/250V.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid 

or gel type batteries.

• Maximum charge current .7 amp.
• Automatic switch over to stand-by battery when

AC fails (zero voltage drop).

• AC fail supervision (form "C" contacts). 
• Low battery supervision (form "C" contacts). 
• Battery presence supervision (form “C” contacts).
• AC input and DC output LED indicators.
• Enclosure:

- Combination knockouts are 1/2” and 3/4”
- Accommodates up to two (2) 12VDC/12AH batteries.

UL 294

UL Listed for Access Control 
System Units.

UL 1481 UL Listed Standard for Safety for

Fire Protective Signaling Systems.

MEA -  NYC Department of 

Buildings Approved.

CSFM -  California State Fire 

Marshal Approved.