Altronix SMP3E Dépliant

•  6VDC or 12VDC output use TP1640 or
 24VDC output use T2428100.

•  6VDC, 12VDC or 24VDC selectable output.
•  2.5 amp continuous supply current.
•  Filtered and electronically regulated output.
•  Short circuit and thermal overload protection.

•  Built-in charger for sealed lead acid or
 gel type batteries.
•  Automatic switch over to stand-by battery
 when AC fails.
•  Maximum charge current 0.3 amp.
•  Battery short circuit protection (circuit breaker).

•  AC input and DC output LED indicators.

•  Operating temperature: --- 20º C to 49º C ambient.
•  BTU/Hr.:
 -  6VDC: 5 BTU/Hr.
 -  12VDC: 10 BTU/Hr.
 -  24VDC: 18 BTU/Hr.
•  System AC input VA requirement:
 -  6VDC/12VDC: 55.2VA.
 -  24VDC: 115VA.

•  Enclosure Dimensions (H x W x D approx.):
 8.5” (215.9mm) x 7.5” (190.5mm) x 3.5” (88.9mm)
•  Product weight (approx.): 2.8 lbs. (1.27 kg.).
•  Shipping weight (approx.): 3.8 lbs. (1.72 kg.).

•  Includes battery leads.
•  Power supply/charger with enclosure.
•  Fits one (1) 12VDC/7AH or
 two (2) 12VDC/4AH batteries.

This power supply/charger converts a low voltage AC input into 6VDC, 12VDC or
24VDC @ 2.5 amp continuous supply current. This unit has a wide range of
applications for access control, security and CCTV system accessories that require
additional power.

Rev. DSSMP3E_07162012

SMP3E