Toshiba IK-TF7P2 Manuale Utente
5
This product is a 3CCD color camera with digital video output.
CAUTIONS ON USE AND INSTALLATION
1.
• Handling the unit.
Do not drop, jolt, or vibrate, as this may result in
damage to the unit and may cause problems.
damage to the unit and may cause problems.
Treat the camera cables carefully to prevent cable
problems, such as breaks in the cable and loose
connections.
problems, such as breaks in the cable and loose
connections.
• Install the camera in a location free from noise.
If the camera or the cables are located near power
utility lines or a TV, etc. undesirable noise may
appear on the screen. In such a case, try to change
the location of the camera or the cable wiring. Con-
sult with a service personnel, if the noise still appears
after changing the location or the cable wiring.
utility lines or a TV, etc. undesirable noise may
appear on the screen. In such a case, try to change
the location of the camera or the cable wiring. Con-
sult with a service personnel, if the noise still appears
after changing the location or the cable wiring.
• Operating ambient temperature and humidity.
Do not use the camera in places where temperature
and humidity exceed the specifications. Picture
quality will deteriorate and internal parts may be
damaged.
and humidity exceed the specifications. Picture
quality will deteriorate and internal parts may be
damaged.
Be particularly careful when using in places exposed
to direct sunlight. When shooting in hot environ-
ments, depending on the conditions of the object and
the camera (for example when the gain is increased),
noise in the form of vertical strips or white dots may
occur. This is not a malfunction.
to direct sunlight. When shooting in hot environ-
ments, depending on the conditions of the object and
the camera (for example when the gain is increased),
noise in the form of vertical strips or white dots may
occur. This is not a malfunction.
• When not using the camera for extended periods
of time.
Switch the control unit off and disconnect the power
supply.
Switch the control unit off and disconnect the power
supply.
• Avoid using or storing the camera in the follow-
ing places:
Places filled with highly flammable and corrosive gas.
Places filled with highly flammable and corrosive gas.
Places near gasoline, benzene, or paint thinner.
Places subject to strong vibration.
Places containing chemicals (such as pesticides),
rubber or vinyl products for extended periods of time.
rubber or vinyl products for extended periods of time.
• Do not shoot intense light.
If there is an intense light at a location on the screen
such as a spot light, a blooming and smearing may
occur. When intense light enters, vertical stripes
may appear on the screen. This is not a malfunction.
Ghosts may occur when there is an intense light near
the object. In this case, change the shooting angle.
such as a spot light, a blooming and smearing may
occur. When intense light enters, vertical stripes
may appear on the screen. This is not a malfunction.
Ghosts may occur when there is an intense light near
the object. In this case, change the shooting angle.
• Moire
A moire pattern is an interference pattern generated
when two repetitive line patterns overlap. This is not
a malfunction. Eliminating the repetitive line patterns,
or aligning the two patterns, will eliminate the moire.
when two repetitive line patterns overlap. This is not
a malfunction. Eliminating the repetitive line patterns,
or aligning the two patterns, will eliminate the moire.
• Handling of the protection cap.
Keep the protection cap away from children as they
may pose a choking hazard. The protection cap
protects the image sensing plane when the lens is
removed from the camera head, do not discard.
may pose a choking hazard. The protection cap
protects the image sensing plane when the lens is
removed from the camera head, do not discard.
• When cleaning the camera.
Unplug the power source before cleaning. Clean with
a soft dry cloth only. Do not use chemicals or chemi-
cally treated cloths. Chemicals may damage coatings
and printed letters. When cleaning the lens, use lens
cleaning paper.
a soft dry cloth only. Do not use chemicals or chemi-
cally treated cloths. Chemicals may damage coatings
and printed letters. When cleaning the lens, use lens
cleaning paper.
COMPONENTS
2.
(1) Camera Control Unit ...................................................................................................................... 1
(2) Accessories
(a) Instruction manual .................................................................................................................. 1
(b) EMI core ................................................................................................................................. 1
(2) Accessories
(a) Instruction manual .................................................................................................................. 1
(b) EMI core ................................................................................................................................. 1
7. 5 Partial Read ............................................32
( 1 ) Partial Scanning OFF
( 1 ) Partial Scanning OFF
(All pixels scanning) ................................32
( 2 ) Partial Scanning ON ...............................32
( 3 ) When Partial Scanning Mode is ON .......33
7. 6 External Sync ..........................................34
( 1 ) External sync signal polarity ...................34
( 2 ) External sync frequency range ...............34
( 3 ) Using the unit with external sync signal ..34
( 3 ) When Partial Scanning Mode is ON .......33
7. 6 External Sync ..........................................34
( 1 ) External sync signal polarity ...................34
( 2 ) External sync frequency range ...............34
( 3 ) Using the unit with external sync signal ..34
(3. 1) H (horizontal) phase adjustment ..34
8. INPUT OUTPUT SIGNAL SPECIFICATIONS 35
9. CCD OUTPUT WAVEFORM TIMING CHART 36
10. BEFORE MAKING A SERVICE CALL ...........37
11. SPECIFICATIONS ..........................................37
12. EXTERNAL APPEARANCE DIAGRAM.........38
9. CCD OUTPUT WAVEFORM TIMING CHART 36
10. BEFORE MAKING A SERVICE CALL ...........37
11. SPECIFICATIONS ..........................................37
12. EXTERNAL APPEARANCE DIAGRAM.........38
120730c1_IK_TF7P2_EN.indd 5
12.7.30 1:18:59 PM