TP-LINK TL-SL3226P Manuale Utente

Out-of-Band Management needs a terminal or a HyperTerminal.

First, connect the Switch's console port with the PC's console port by the 

console cord. Then, run HyperTerminal. Refer to the following figure to 

configure the HyperTerminal.

The speed of the console port is 9600bps. The data bit is 8 bit. There is no 

Parity Test and flow control. The Stop bit is 1.

If there is no HyperTerminal in the system, you can setup the HyperTerminal 

software from the system setup disk or download from the website such as 

HyperTerminal Private Edition. The configuration way is similar with that on 

Windows. 

No matter through TELNET or Out-of-Band Management, the users have 

two rights:

!

Admin:    the control right to manage the Switch

!

Guest:   the read right for part of objects Admin visits.

Since Guest account has the read right only for some pages, there will be a 

prompt to remind the user no right for reversion when the Guest account 

want to configure the active the Switch. When the account wants to enter 

SNMP menu, Security menu, IEEE802.1X protocol menu, file transmission 

menu and reset menu of the system configuration menu, the account will be 

reminded no right to enter.

Because the basic content of TELNET and Out-of-band Management 

through the Console port is as same as each other, we introduce them 

together.

After you use the correct user's name and password (the default user's name 

and password are supervisor), you will log on the interface of TELNET/Out-

of-Band Management.

 TL-SL3226P

 24+2G Gigabit Managed Switch User's Guide

 TL-SL3226P

 24+2G Gigabit Managed Switch User's Guide

Figure 4-1 Console configuration