TP-LINK TL-SL3226P Manuale Utente

!

!

1)         Assigned Managed Port: can be any port or all ports from P1 to P26. 

Only the workstation connecting to the Assigned Managed Port in the 

Switch can manage the Switch. The default is All ports.

2)         Broadcast Strom Filtering Mode: have six choices: 5%, 10%, 15%, 

20%, and 25%.

3)       The configuration of parameters won't be effect until you activate the 

changes. When you press Ctrl + U, the Switch will list 

Are you sure 

you want to activate the changes (Y/N)?

. Y for confirmation, N for 

cancel.

1)          Transfer types are Update System, Backup Switch Config and Updata 

Switch Config.

Through the program files using by TFTP server to update the Switch, 

download the program files provided by TFTP server into the Switch to 

realize the software update.

Upload the configuration files of the Switch to TFTP server to store the 

configuration parameters of the Switch.

download the configuration files for the Switch from TFTP server to update 

the Switch configuration.

2)     When downloading TFTP, TFTP server must have the files for updating.

3)       You must guarantee the TFTP server in operating.

4)         To break the download is not allowed during the TFTP download. Or 

else the Switch may be out of the way.

When you reset to factory situation, all parameters except IP address can be 

configured to factory configuration.

 

In the IEEE802.1Q Tag VLAN mode, there are two pages of port parameters 

as figure 4-3 and figure 4-4. In the figure 4-3, when the cursor is on the 

Speed/Duplex, the interface as figure 4-4 will exist when you move the 

cursor right. 

In the Port VLAN mode or VLAN Disable mode, there is only one page of port 

parameters as figure 4-5.

The Port Security of Port 2 in the above figure is not configurable because 

!

 TL-SL3226P

 24+2G Gigabit Managed Switch User's Guide

 TL-SL3226P

 24+2G Gigabit Managed Switch User's Guide

Figure 4-4  Port Management