Motorola MBP41 B17000MBP41RU Manuale Utente

Codici prodotto
B17000MBP41RU
Pagina di 27
Getting Started
9
ENGLISH
2. Replace the battery cover over the compartment and gently tighten 
the screw in a clockwise direction using a Small cross head or Flat 
end screw drivers.
2.3
Parent Unit Power Supply
IMPORTANT
Installing the rechargeable battery pack and charging it fully before use is 
recommended. This will allow the unit to operate on battery in the event 
of a power failure.
1. Connect the small plug of the power adapter to the parent unit and 
the other end to the electrical outlet. Only use the enclosed power 
adapter (6V DC/500mA).
2. Press and hold the 
P
 POWER ON/OFF button for 1 second to 
turn ON the parent unit.
3. Once the baby and parent units are switched on, the display on the 
parent unit will show the video captured by the baby unit.
4. If there is no connection or you are out of range, the video display 
will go off and the words 
No Signal
 will be shown on the LCD display, 
and the unit will beep every 5 seconds. Move the parent unit closer 
to the baby unit until the link is re-established.
5. Press and hold the 
P
 POWER ON/OFF button, until the progress 
bar finishes scrolling, to turn OFF the parent unit.
NOTE
The battery icon 
 turns RED to indicate that the battery is low, and it 
gives a beep every 16 seconds. The battery needs to be recharged. The 
battery pack takes about 16 hours to charge fully.
0