Juniper 1 port T1 Mini Physical Interface Module JXM-1T1-S Scheda Tecnica
Codici prodotto
JXM-1T1-S
Datasheet
Page
Juniper Networks T1 Mini-PIM
The Juniper Networks optional single-port T1 Mini Physical Interface Modules (Mini-PIM)
for the SSG 20 platform complement the five on-board 10/100 Ethernet interfaces
with expanded WAN connectivity. The T1 Mini-PIMs include one physical T1 port with an
integrated CSU/DSU.
for the SSG 20 platform complement the five on-board 10/100 Ethernet interfaces
with expanded WAN connectivity. The T1 Mini-PIMs include one physical T1 port with an
integrated CSU/DSU.
Specifications
Product Number
Description
JXM-1T1-S
1 port T1 Mini Physical Interface Module
ScreenOS Software Release
The T1 Mini PIM is supported in ScreenOS 5.4 on the SSG 20
Network Interface Specifications
Transmit bit rate: 1.544 Mbps
Receive bit rate: 1.544 Mbps
Line encoding:
Receive bit rate: 1.544 Mbps
Line encoding:
AMI
B8ZS
Modes:
Framed Clear Channel
Fractional
Framing:
Superframe (D4/SF)
Extended Superframe (ESF)
HDLC Features
- N x 64 Kbps or N x 56 Kbps, nonchannelized data rates (T1:N=1 to 24)
- CRC 16/32
- Shared Flag
- Idle flag/fill
- Counters: Runts, Giants, FCS, Error, Abort Error, Align Error
- CRC 16/32
- Shared Flag
- Idle flag/fill
- Counters: Runts, Giants, FCS, Error, Abort Error, Align Error
Interface Connector
- RJ-48
System timing
- External (network recovered clocks)
Dimensions (W x L x H) and Weight
- 3.75” x 5.9” x 0.80”
- 9.5 cm x 14.5 cm x 2.0 cm
- 0.18 lb. (81.6g)
- 9.5 cm x 14.5 cm x 2.0 cm
- 0.18 lb. (81.6g)
Environmental
Operating temperature: 0-40°C
Storage temperature: -40 to 70°C
Relative humidity: 5% to 90% non-condensing
Storage temperature: -40 to 70°C
Relative humidity: 5% to 90% non-condensing
Loopback Diagnostics
- Local, Remote, Payload
- Test patterns (BERT)
- All ones
- All zeros
- Alternating ones and zeros (AA/55)
- 1:3 or 1 in 4 pattern
- 1:7 or 1 in 8 pattern
- 3:24 - 3 bits set in every 24 bits
- QRSS20 (Modified PRBS 2^20-1, with 14 zero suppression)
- PRBS 2^7-1
- PRBS 2^9-1 (as specified in ITU-T O.153)
- PRBS 2^11-1 (as specified in ITU-T O.153)/2047 pattern
- PRBS 2^15-1 (as specified in ITU-T O.151/O.153)
- PRBS 2^20-1 (as specified in ITU-T O.153)
- Programmable word or 32-bit programmable pattern
- Network (T1) alarms
- LOS, LOF, AIS, YLW
- Test patterns (BERT)
- All ones
- All zeros
- Alternating ones and zeros (AA/55)
- 1:3 or 1 in 4 pattern
- 1:7 or 1 in 8 pattern
- 3:24 - 3 bits set in every 24 bits
- QRSS20 (Modified PRBS 2^20-1, with 14 zero suppression)
- PRBS 2^7-1
- PRBS 2^9-1 (as specified in ITU-T O.153)
- PRBS 2^11-1 (as specified in ITU-T O.153)/2047 pattern
- PRBS 2^15-1 (as specified in ITU-T O.151/O.153)
- PRBS 2^20-1 (as specified in ITU-T O.153)
- Programmable word or 32-bit programmable pattern
- Network (T1) alarms
- LOS, LOF, AIS, YLW
The combination of a T1 modem and an integrated CSU/DSU
eliminates the need to deploy several separate external devices, thereby
consolidating devices to reduce capital expenditures, saving valuable
space and simplifying management.
eliminates the need to deploy several separate external devices, thereby
consolidating devices to reduce capital expenditures, saving valuable
space and simplifying management.
Features
• Fully integrated CSU/DSU
• Full and fractional T1 capabilities
• 56K & 64K modes support
• ANSI T1.102, T1.107, T1.403 T1 support
• Independent Clock
• Loopback, BERT, FDL, and Long Buildout diagnostics
• Complete configuration and management by CLI, WebUI, or
• Full and fractional T1 capabilities
• 56K & 64K modes support
• ANSI T1.102, T1.107, T1.403 T1 support
• Independent Clock
• Loopback, BERT, FDL, and Long Buildout diagnostics
• Complete configuration and management by CLI, WebUI, or
NetScreen Security-Manager