Atmel Evaluation Kit AT91SAM9X35-EK AT91SAM9X35-EK Scheda Tecnica

 11055E–ATARM–10-Mar-2014

The SAM9X35 is a highly-integrated 400 MHz ARM926EJ-S™ embedded MPU,
featuring an extensive peripheral set and high bandwidth architecture for industrial
applications that require refined user interfaces and high-speed communication. 

The SAM9X35 features a graphics LCD controller with 4-layer overlay and 2D
acceleration (picture-in-picture, alpha-blending, scaling, rotation, color conversion),
and a 10-bit ADC that supports 4- or 5-wire resistive touchscreen panels.
Networking/connectivity peripherals include two 2.0A/B compatible Controller Area
Network (CAN) interfaces and an IEEE Std 802.3-compatible 10/100Mbps Ethernet
MAC. Multiple communication interfaces include a soft modem supporting exclusively
the Conexant SmartDAA line driver, HS USB Device and Host, FS USB Host, two HS
SDCard/SDIO/MMC interfaces, USARTs, SPIs, I2S, TWIs and 10-bit ADC. 

The 10-layer bus matrix associated with 2 x 8 central DMA channels as well as
dedicated DMAs to support the high-speed connectivity peripherals ensure
uninterrupted data transfer with minimum processor overhead.

The External Bus Interface incorporates controllers for 4-bank and 8-bank
DDR2/LPDDR, SDRAM/LPSDRAM, static memories, and specific circuitry for
MLC/SLC NAND Flash with integrated ECC. 

The SAM9X35 is available in a 217-ball BGA package with 0.8 mm ball pitch.