Reely RtF 630 mm 1232130 Manuale Utente

This product is an electrically powered model airplane with wireless control (radio remote control) via the transmitter 

included in the delivery. The model is designed for suitable halls and must only be used on wind-still or low-wind days 

outside. The model airplane is pre-assembled and is delivered with built-in remote control and drive components.
The product must not become damp or wet.
The product is not suitable for children under 14 years of age.

  Observe all safety information in these operating instructions. They contain important information on hand-

ling of the product.

 

You are solely responsible for safe operation of the model!

The flight model „Phönix Nano“ is a pre-fabricated RtF model (Ready to Fly), that is ready for use in just a few steps. 

All drive and control components are built-in and ready for use. Control takes place via an easy to operate transmitter 

that may be operated either in mode 1 or mode 2. 
For operation of the transmitter, 4 mignon batteries (e.g. Conrad item no.: 652504, pack of 4, order 1x) are required. 

The two operating levers at the transmitter are used to control motor speed, flight height and flight direction. The LiPo 

battery to be inserted in the model is charged with the included transmitter. 

•  Fuselage 
•  Wing
•  Elevator rudder
•  Rudder
•  Transmitter
•  LiPo Flight Battery
•  Operating Instructions 

  In the further course of these instructions, figures in the text always refer to the adjacent figure or the figures 

within the section. References to other figures are indicated with the corresponding figure number.