Audio-Technica AT U851CW GRENZFLÄCHENMIKROFON AT U851cW Scheda Tecnica
Codici prodotto
AT U851cW
Wireless Essentials
®
Accessory Microphones and Input Cables
For all Audio-Technica UniPak
®
Wireless Systems
WIRELESS LAVALIER MICROPHONES
AT829cW Cardioid Condenser Wireless Lavalier Microphone
AT831cW Cardioid Condenser Wireless Lavalier Microphone
MT830cW Omni Condenser Wireless Lavalier Microphone
MT830cW-TH Omni Condenser Wireless Lavalier Microphone (beige color)
• For professional business presentations, public speaking,
theater performances
Operation: These microphones’ small size
allows them to be worn as a lavalier, or hidden
in loose clothing. For normal lavalier use, attach
the microphone about 6" (15 cm) below the
user’s chin. Anticipate movements that may
cause the microphone to rub against or be
covered by clothing and position the microphone
to avoid it.
allows them to be worn as a lavalier, or hidden
in loose clothing. For normal lavalier use, attach
the microphone about 6" (15 cm) below the
user’s chin. Anticipate movements that may
cause the microphone to rub against or be
covered by clothing and position the microphone
to avoid it.
WIRELESS GOOSENECK MICROPHONE
U857ALcW Cardioid Condenser Wireless Gooseneck Microphone
• For high-quality sound reinforcement,
professional recording and
broadcasting
broadcasting
• Small-diameter, alternating gooseneck
design permits highly flexible positioning
• Overall length of 16.58" (421.0 mm)
Operation: The microphone direct mounts to any
5
/
8
"-27 stand, or to the included threaded mounting
flange. Cable exit is from the bottom of the microphone.
If necessary, the included pass-through adapter may be
used to provide a side exit for the cable.
If necessary, the included pass-through adapter may be
used to provide a side exit for the cable.
WIRELESS BOUNDARY MICROPHONE
U851cW Cardioid Condenser Wireless Boundary Microphone
• Designed for surface-mount applications in
sound reinforcement, professional recording,
broadcasting and theater performances
broadcasting and theater performances
• Heavy die-cast case and rubber feet
minimize coupling of surface
vibration to the microphone
vibration to the microphone
• Low-profile design for minimum visibility
Operation: The microphone should be placed
on a flat, unobstructed mounting surface, with
the front of the microphone facing the sound
source. The sound source should not be below,
or higher than 60° above, the plane of the
mounting surface.
on a flat, unobstructed mounting surface, with
the front of the microphone facing the sound
source. The sound source should not be below,
or higher than 60° above, the plane of the
mounting surface.
WIRELESS CLIP-ON INSTRUMENT MICROPHONES
ATM350cW Cardioid Condenser Wireless Instrument Microphone
PRO 35cW Cardioid Condenser Wireless Instrument Microphone
• For close-miking brass, woodwinds and any
hard-to-mic instruments
• UniMount
®
clip permits accurate positioning
while protecting element
Operation: Clip directly on to instrument. The
microphone is uniquely capable of picking up high-
intensity sound without distortion.
microphone is uniquely capable of picking up high-
intensity sound without distortion.
WIRELESS HEADWORN MICROPHONES
ATM73cW Cardioid Condenser Wireless Headworn Microphone
ATM75cW Cardioid Condenser Wireless Headworn Microphone
PRO 8HEcW Hypercardioid Dynamic Wireless Headworn Microphone
AT889cW Noise-cancelling Condenser Wireless Headworn Microphone
• Designed for professional public speaking, aerobics instruction,
and other demanding applications
• Comfortable, unobtrusive headband design
Operation: After use in high-moisture applications, such as aerobics
instruction, on-stage performing, etc., remove the foam screen, wipe off
the headset with a towel and permit them to air-dry. (Do not store in a
closed space, such as a plastic bag, until all moisture has evaporated.)
instruction, on-stage performing, etc., remove the foam screen, wipe off
the headset with a towel and permit them to air-dry. (Do not store in a
closed space, such as a plastic bag, until all moisture has evaporated.)
ATM73cW: Wear the headband around the back of the head with each
cushioned support pad resting on the temple in front of the ear.
cushioned support pad resting on the temple in front of the ear.
ATM75cW and PRO 8HEcW: Wear the headband around the back of the
head with each cushioned support pad resting on the temple in front of
the ear. The assembly may be oriented
so that the microphone descends from
either the left or right side. The cable
should remain clipped to the headband,
with some slack at the boom connection.
head with each cushioned support pad resting on the temple in front of
the ear. The assembly may be oriented
so that the microphone descends from
either the left or right side. The cable
should remain clipped to the headband,
with some slack at the boom connection.
AT889cW: Position the adjustable band
around the back of the neck, placing the
cushioned earpieces over each ear.
Adjust the headband as necessary for a
stable, comfortable fit.
around the back of the neck, placing the
cushioned earpieces over each ear.
Adjust the headband as necessary for a
stable, comfortable fit.
GUITAR AND MICROPHONE CABLES
AT-GCW Guitar Input Cable
XLRW Microphone Input Cable
• Engineered for maximum signal transfer and minimum loss
• Heavy-duty construction and state-of-the-art professional
connectors
Operation:
AT-GCW: Connects electric guitar, bass
and other instruments with a
and other instruments with a
1
/
4
"
output jack to an Audio-Technica
UniPak
UniPak
®
body-pack transmitter.
XLRW: Connects a Lo-Z microphone
with an XLRM-type output to an
Audio-Technica UniPak
with an XLRM-type output to an
Audio-Technica UniPak
®
body-pack
transmitter.
ATM75cW
ATM350cW
AT-GCW
AT829cW
U851cW
U857ALcW