Casio MEP-U10 488309 Scheda Tecnica
Codici prodotto
488309
35
Printing Troubleshooting
Symptom
Cause and Required Action
Tape does not
come out of
printer when
printing.
come out of
printer when
printing.
●
The printer cover is not closed securely.
Securely close the cover.
See the user documentation that comes with the
printer for more information.
Securely close the cover.
See the user documentation that comes with the
printer for more information.
•
➜
➜
The printer is out of tape.
Replace the tape cartridge with a new one.
See the user documentation that comes with the
printer for more information.
Replace the tape cartridge with a new one.
See the user documentation that comes with the
printer for more information.
•
➜
➜
Tape is jammed.
Remove the tape from the printer, pull out the jammed
tape with your fi ngers, correctly reload the tape into
the printer.
Remove the tape from the printer, pull out the jammed
tape with your fi ngers, correctly reload the tape into
the printer.
Important!
Do not do any of the following while printing is in
progress.
Do not do any of the following while printing is in
progress.
Block the tape outlet
Touch tape coming out of the printer
Open the printer cover
Disconnect the AC adaptor
Turn off power
Disconnect the USB cable
Touch tape coming out of the printer
Open the printer cover
Disconnect the AC adaptor
Turn off power
Disconnect the USB cable
See the user documentation that comes with the
printer for more information.
printer for more information.
•
➜
➜
•
•
•
•
•
•
•
•
•
•
•
Symptom
Cause and Required Action
Tape does not
come out of
printer when
printing.
come out of
printer when
printing.
●
The printer is not correctly connected to your
computer or you computer’s USB port is not enabled.
Check to make sure that the USB cable is connected
correctly.
If you are using a printer that has a display, check
to make sure that the message “Ready for data
transfer” is displayed.
Also, depending on your computer’s operating
system, perform one of the procedures below to make
sure that your computer’s USB port is enabled.
computer or you computer’s USB port is not enabled.
Check to make sure that the USB cable is connected
correctly.
If you are using a printer that has a display, check
to make sure that the message “Ready for data
transfer” is displayed.
Also, depending on your computer’s operating
system, perform one of the procedures below to make
sure that your computer’s USB port is enabled.
Windows 8, Windows 7, Windows Vista
Log in to your computer with an administrator account
and perform the steps below.
1. On the Start menu, click Control Panel.
2. Click Hardware and Sound and then Device
Log in to your computer with an administrator account
and perform the steps below.
1. On the Start menu, click Control Panel.
2. Click Hardware and Sound and then Device
Manager.
3. On the User Account Control dialog box that
appears, click the Continue button.
4. Click the plus (+) icon next to Universal Serial
Bus controllers.
Windows XP
Log in to your computer with an administrator account
and perform the steps below.
1. On the Start menu, click Settings( S ) and then
Log in to your computer with an administrator account
and perform the steps below.
1. On the Start menu, click Settings( S ) and then
Control Panel( C ).
2. Double-click the System icon.
3. Click the Hardware tab and then click the Device
3. Click the Hardware tab and then click the Device
Manager button.
4. Click the plus (+) icon next to USB (Universal
Serial Bus) controllers.
If the USB host controller and USB route hub appear, it
means that USB is enabled. If there are multiple hubs in
the USB chain, try connecting the printer USB cable to
another hub or try connecting to another device. Also,
check to make sure that the cable is securely connected.
If the USB host controller and USB route hub do not
appear, refer to the documentation that comes with your
computer or contact the manufacturer of your computer
to fi nd out how to set up and enable USB.
means that USB is enabled. If there are multiple hubs in
the USB chain, try connecting the printer USB cable to
another hub or try connecting to another device. Also,
check to make sure that the cable is securely connected.
If the USB host controller and USB route hub do not
appear, refer to the documentation that comes with your
computer or contact the manufacturer of your computer
to fi nd out how to set up and enable USB.
•
➜
➜
■
■