Jst 808930 ZH Series Crimped Wire Single-sided with BZH-002T-P0.5 400 mm 808930 Scheda Tecnica
Codici prodotto
808930
ZH
CONNECTOR
1.5mm pitch/Disconnectable Crimp style connectors
Emboss Tape
7.1
3.7
2.7
（3.4）
4.6
1.5
±0.05
1.5min
4.6min
φ0.7
±0.03
φ 0.7
±
0.03
1.5
±
0.05
3.5
5.6
2.7
（3.4）
1.5min
2.2min
Top entry type
Side entry type
1.5
(N-1)
×
0.7min 1.5
± 0.05
0.9
± 0.05
φ1.1
＋ 0.1
0
2.0
min
2.5
max
＋ 0.9
3.7
（7.4）
1.5
±0.05
1.3
±0.1
1.5
±0.1
2.0
0.6
2.3
±0.1
0.7
min
（6.4）
3.7
1.5
±0.05
1.4
±0.1
1.1
4.3
1.9
±0.1
1.4
±0.1
±0.1
0.7
min
3.7
（7.4）
SM2 type
Side entry type
Side entry type
Side entry type
SM4 type
Top entry type
Top entry type
The ZH connector is very small with a
mounting height of 5.6mm and a thickness
of only 3.5mm. Contact retention lances on
the housing make insertion easier, while
the dimple at the center of the contact
ensures reliable contact with the post.
mounting height of 5.6mm and a thickness
of only 3.5mm. Contact retention lances on
the housing make insertion easier, while
the dimple at the center of the contact
ensures reliable contact with the post.
• Compact, low profile design
• Housing lances
• Reliable contact construction
• Distortion resistant construction
• Compatible with the ZR insulation
• Housing lances
• Reliable contact construction
• Distortion resistant construction
• Compatible with the ZR insulation
displacement connectors
Specifications –––––––––––––––––––
• Current rating:
1.0A AC, DC (AWG #26)
• Voltage rating:
50V AC, DC
• Temperature range:
-
25˚C to
+
85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/20m
Ω max.
After environmental testing/30m
Ω max.
• Insulation resistance:
500M
Ω min.
• Withstanding voltage:
500V AC/minute
• Applicable wire: AWG #32 to #26
• Applicable PC board thickness: 0.6 to 1.2mm,1.6mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
• Applicable PC board thickness: 0.6 to 1.2mm,1.6mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0
Recognized E60389
1
Certified LR20812
〈Through-hole type (viewed from soldering side) 〉
Note: 1. Tolerances are non-cumulative:
±0.05mm for all centers.
2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should
be larger. The dimensions above should serve as a guideline. Contact JST for details.
〈SMT type (viewed from component side) 〉
Note: 1. N...Number of circuits
2. Tolerances are non-cumulative:
±0.05mm for all centers.
3. The dimensions above should serve as a guideline. Contact JST for details.
PC board layout and Assembly layout
16