Reely Hexacopter RtF incl. camera 1235077 Scheda Tecnica

To record a photograph, push the operating button for the video camera (see figure 1, item 11) once briefly to the 

down/backwards towards your body. The remote control emits a long signal sound as confirmation. The blue LED in 

the middle of the housing top will go out briefly and on again, thus signalling that the picture has been recorded. The 

LED of the camera electronics will flash red briefly thrice and then be lit green again permanently.

After touch-down, disconnect the flight battery from the hexacopter and remove the memory card from the card chute. 

The photo and video data can then be read with a suitable memory card reader (not enclosed) on a notebook or PC. 

Photographs and videos are saved in separate folders on the memory card.
Observe the following notes for use of the camera:
•  If you are not using the camera, remove the memory card from the card chute.
•  Observe that the flight battery is disconnected from the hexacopter when you insert or remove the memory card; 

otherwise, files on the memory card may be damaged.

•  Do not touch the contacts on the rear of the memory card.
•  The memory card must be pushed correctly and completely into the camera; otherwise, there may be damage.
•  Observe the legal basics of your country regarding photographs and videos of persons, objects and facilities, as 

well as their publication. You alone are taking full responsibility if use of the camera violates any rights, laws or 

regulations.