Whirlpool MH2155XP Manuale Utente

Pagina di 16
7
Number Codes
The microwave oven is preset with shortcut number codes. A 
number code includes one or more of the following: cooking 
power, cook time and food quantity or weight. See the charts in 
the “Cooking” and/or “Reheating” sections for additional 
information.
Start
The START pad begins any function. If not touched within 
5 seconds after touching a pad, “START?” will appear on the 
display as a reminder. If not touched within 1 minute after 
touching a pad, the display will return to the time of day mode 
and the programmed function will be canceled.
If cooking is interrupted, touching START will resume the preset 
cycle.
Add 30 Seconds
Cook time may be added in 30-second increments, up to 
99 minutes, 99 seconds, by touching ADD 30 SEC.
Touching ADD 30 SEC. during a cook cycle will add 30 seconds 
of cook time at the current cook power.
Touching ADD 30 SEC. when the microwave oven is not in use, or 
after a cook cycle has ended, will start the microwave oven for 
30 seconds of cook time at 100% cook power.
Cancel
The CANCEL pad stops most functions except for the Timer, 
Child Lock and Demo Mode.
The microwave oven will also turn off when the door is opened. 
Close the door and touch START to resume the cycle.
Clock
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
The microwave oven and timer must be off.
1. Touch CLOCK.
2. Touch the number pads to set the time of day.
3. Touch CLOCK or START.
To Remove:
1. Touch CLOCK.
2. Touch 0.
3. Touch CLOCK.
The time will disappear, and “:” will appear on the display.
Tones
Tones are audible signals, indicating the following:
One tone
Valid entry (short tone)
End of Timer countdown (long tone)
Two tones
Reminder, repeat each minute after the end-of-cycle tones
End of stage in multistage cooking
Turn food during defrost cycle (short tones)
Hidden feature has been entered or exited
Three tones
Invalid entry
Four tones
End of cycle
To Turn Off/On Valid Entry Tones: Touch and hold the number 
pad “1” for 5 seconds until 2 tones sound. Repeat to turn tones 
back on.
To Turn Off/On All Tones: Touch and hold the number pad “2” 
for 5 seconds until 2 tones sound. Repeat to turn tones back on.
Timer
The Timer can be set in minutes and seconds, up to 99 minutes 
99 seconds and counts down the set time. 
NOTE: The Timer does not start or stop the microwave oven.
When the Timer is in use, the microwave oven can also operate. 
To see the countdown for 5 seconds when the microwave oven is 
in use, touch TIMER SET.
To Set:
1. Touch TIMER SET.
If no action is taken after 1 minute, the display will return to 
the time of day mode.
2. Touch the number pads to set the length of time.
3. Touch TIMER SET or START.
If not touched within 5 seconds, “START?” will appear on the 
display. If not touched within 1 minute, the display will return 
to the time of day mode and the programmed function will be 
canceled.
When the set time ends, “END” will appear on the display and 
1 tone will sound.
4. Touch TIMER OFF at any time to cancel the Timer.
The length of time can be changed during the countdown by 
repeating the above steps.
Child Lock
The Child Lock shuts down the control panel pads to prevent 
unintended use of the microwave oven.
When the control is locked, only the Vent Fan and Light pads will 
function.
To Lock/Unlock Control: The microwave oven and Timer must 
be off. Touch and hold START for 5 seconds until 2 tones sound 
and a lock icon appears on the display. Repeat to unlock and 
remove the lock icon from display.