Whirlpool AERO PLUS PORTABLESPA Manuale Utente

*Note:  The skills and tools necessary for the safe repair of this spa require the services
             of qualified service personnel.  Contact your dealer.

A.  Actuated too rapidly

A.  Heater mode not selected.
B.  No power to heater.

C.  Thermostat set lower
     than water temperature.
D.  High temperature safety
     switches tripped.

E.  Abnormally low water flow.
F.  Heater relay not operating.
G.  Heater element failure.
H.  Improper 230 VAC
     Conversion

A.  *
B.  *

A.  Select Heater/Filter mode.
B.  Check house circuit breaker
     and GFCI.
C.  Turn to desired temperature.

D.  Reset buttons on heater after
     water has cooled; see *Note if
     switches continue to trip.
E.  See Remedy 6 below.
F.  *
G.  *
H.  Contact electrician.

A.  Select JETS mode for maximum
      flow.
B.  Fill to water level indicator
      mark on skimmer/filter frame.
C.  Fill to middle of skimmer.
D.  Clean strainers or skimmer baskets

E.  Clean or replace.

A. Wait 60 seconds; system
     will be restored automatically.

A.  Relay malfunction.
B.  Element malfunction.

A.  Clogged or blocked suction
     strainer or skimmer basket.
B.  Filter clogged (dirty).
C.  Poor water chemistry.
D.  Insufficient filtering time.
E.  mproper maintenance.
F.  High content of solids in water.

A.  Clean strainer/skimmer basket.

B.  Clean or replace.
C.  See “Chemistry” section.
D.  Run filter.
E.  See Maintenance section.
F.  Use clarifier or drain and refill
    spa.

A.  Leak in suction line, dis-
     charge line, or connections.
B.  Excessive evaporation and/or
     splashing.

A.  Repair leak.

B.  Use rigid spa cover; lower
     thermostat setting.

A.  Normal operation in FILTER or
     HTR/FILTER mode.
B.  Low water level.

C.  Low Water Level
D.  Clogged or blocked suction
      strainer or skimmer basket.
E.  Dirty filter.

F.  Suction or discharge line
     partially plugged.
G.  Pump running at subnormal speed.
H.  Worn or damaged pump seal.

F.  *

G.  *
H.  *