Western Digital 4CH TRIPLEX Manuale Utente

 

1. 

Connect an USB flash memory stick into USB port. 

2. 

Select the still image that you want to backup in an USB flash memory stick. Please 

refer to “5-8-2. Viewing Captured Image”. 

3. 

Press SEL button. Then the still image will be stored in an USB flash memory stick. 

 

NOTICE 

Please contact to the supplier or installer of DVR in order to confirm the compatible models of 

USB flash memory stick.

 

 

 

 

To control the PTZF functions of the camera, connect the controller to the RS-485 port.     

For speed dome cameras that supports RS-485, connect them directly to the RS-485 port. But if

the camera is controlled with RS-232C, one needs to use Signal Converter (RS-485 to RS-232C). 

 

 

 

1. In PTZ from the SETUP menu, set the protocol type of the camera for the channel you 

wish to control to be the same as the camera that is installed. If the camera has a specific 

camera ID, move the cursor on the field of <Camera ID> and select the camera ID using 

 buttons. 

   

 

2. Press the MISC button in triple to go to the screen where PTZF can be adjusted. 

52