Sony MULTI CHANNEL AV RECEIVER STR-DG710 Manuale Utente

 

 

 

 

Press TUNING + to scan from low to 
high; press TUNING – to scan from high 
to low.
The receiver stops scanning whenever a 
station is received.

Turn INPUT SELECTOR to select the FM 
or AM band.

Press TUNING MODE repeatedly to select 
“AUTO T.”.

Turn TUNING +/–.

If the FM stereo reception is poor and “ST” 
flashes on the display, select monaural audio 
so that the sound will be less distorted.
Press FM MODE repeatedly until the 
“MONO” indicator lights up on the display. 
To return to stereo mode, press FM MODE 
repeatedly until the “MONO” indicator on the 
display does not light up.

Enter the frequency of a station directly by 
using the numeric buttons.

You can also use INPUT SELECTOR on 
the receiver.

Example 1: FM 102.50 MHz
Select 1 

b 0 b 2 b 5 b 0

Example 2: AM 1,350 kHz
Select 1 

b 3 b 5 b 0

If you have tuned in an AM station, adjust 
the direction of the AM loop antenna 
(aerial) for optimum reception.

You can also use MEMORY/ENTER on 
the receiver.

Make sure you have entered the right 
frequency. If not, repeat steps 2 to 4. If you 
still cannot tune in a station, the frequency is 
not used in your area.

-