SEH Computertechnik TPG60 Manuale Utente
General Information
TPG60 User Manual
11
1.8
Saving the IP Address in the TPG60
TCP/IP network protocols require the storing of the IP address in the
TPG60 so that the device can be addressed within the network.
TPG60 so that the device can be addressed within the network.
Once the TPG60 is connected to the network, it checks whether an
IP address can be obtained from boot protocols (e.g. DHCP). If this is
not the case, the TPG60 assigns itself an IP address via ZeroConf.
IP address can be obtained from boot protocols (e.g. DHCP). If this is
not the case, the TPG60 assigns itself an IP address via ZeroConf.
Different methods for the assignment of the IP address are described
in the following.
in the following.
• ’DHCP’
• ’BOOTP’
DHCP
The TPG60 supports DHCP, which means that the IP address of the
TPG60 can be assigned dynamically via a DHCP server.
TPG60 can be assigned dynamically via a DHCP server.
Requirements
;
The parameter 'DHCP' has been activated.
After the hardware installation, the TPG60 asks a DHCP server for an
IP address by means of a broadcast query. The DHCP server identifies
the TPG60 on the basis of its hardware address and sends a data
packet to the TPG60.
IP address by means of a broadcast query. The DHCP server identifies
the TPG60 on the basis of its hardware address and sends a data
packet to the TPG60.
This data packet contains, among others, the IP address of the
TPG60, the default gateway, and the IP address of the DNS server.
The data is saved in the TPG60.
TPG60, the default gateway, and the IP address of the DNS server.
The data is saved in the TPG60.
ZeroConf
If no IP address can be assigned via boot protocols, the TPG60
assigns itself an IP address via ZeroConf.
assigns itself an IP address via ZeroConf.
Requirements
;
The parameter 'ZeroConf' has been activated.