SEH Computertechnik TPG60 Manuale Utente
Certificate Management
TPG60 User Manual
67
When the CA certificate has been received, it must be saved in the
TPG60; see: ’How to Save CA Certificates in the TPG60?’
TPG60; see: ’How to Save CA Certificates in the TPG60?’
Creating a Certificate Request via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Mark the TPG60 in the print server list.
3. Select Actions – Certificate – Server certificate from the menu
2. Mark the TPG60 in the print server list.
3. Select Actions – Certificate – Server certificate from the menu
bar. The Certificate dialog appears.
4. Tick Create certificate request.
5. Click Next.
5. Click Next.
6. Enter the relevant parameters, see: table 6
7. Click Next. The parameters are listed.
8. Confirm by clicking Next. The creation of the certificate request
8. Confirm by clicking Next. The creation of the certificate request
is in progress. This may take a few minutes.
9. Copy (Strg+c) the text between 'Begin Certificate Request' and
'End Certificate Request' and save (Strg+v) it into a text file.
10. Send the text file as certificate request to a certification
authority.
When the CA certificate has been received, it must be saved in the
TPG60; see: ’How to Save CA Certificates in the TPG60?’
TPG60; see: ’How to Save CA Certificates in the TPG60?’
8.3
How to Save CA Certificates in the TPG60?
The root certificate must be in base 64 format.
What do you want
to do?