Rose electronic CATx Manuale Utente
INSTALLATION
VIEWLINK CATX INSTALLATION AND OPERATIONS MANUAL
5
Installation
Installing the ViewLink CATx is a very easy plug-and-play process. For the PC, PS/2
and USB models simply connect the HD15M connector on the transmitter to the
HD15F video out connector on the PC. Connect the PS/2 or USB keyboard and
mouse cables to the corresponding connector ports on the PC. Connect the receiver
directly to the keyboard, monitor, and mouse cables used for the KVM station.
Connect the power adapter to the receiver unit’s power port. Finally, connect the
transmitter’s RJ45 connector to the receiver’s RJ45 connector using up to 1,000 feet of
CATx cable.
If you are using a flat panel monitor, Rose Electronics has designed a universal
mounting bracket that can be attached to any edge of a receiver unit and secured to
the back of a flat panel monitor. An example of using this bracket is shown below.
The bracket can be mounted vertically (as shown) or horizontally.
and USB models simply connect the HD15M connector on the transmitter to the
HD15F video out connector on the PC. Connect the PS/2 or USB keyboard and
mouse cables to the corresponding connector ports on the PC. Connect the receiver
directly to the keyboard, monitor, and mouse cables used for the KVM station.
Connect the power adapter to the receiver unit’s power port. Finally, connect the
transmitter’s RJ45 connector to the receiver’s RJ45 connector using up to 1,000 feet of
CATx cable.
If you are using a flat panel monitor, Rose Electronics has designed a universal
mounting bracket that can be attached to any edge of a receiver unit and secured to
the back of a flat panel monitor. An example of using this bracket is shown below.
The bracket can be mounted vertically (as shown) or horizontally.
Figure 3. Monitor mounting bracket
For the Switch DB25 model, connect the transmitter’s DB25M connector to a KVM
switch’s DB25F KVM input connector. Connect the receiver directly to the keyboard,
monitor, and mouse cables used for the KVM station. Connect the power adapter to
the receiver unit’s power port. Finally, connect the Transmitter’s RJ45 connector to
the receiver’s RJ45 connector using up to 1,000 feet of CATx cable.
NOTE: Distance will vary depending on resolution used
switch’s DB25F KVM input connector. Connect the receiver directly to the keyboard,
monitor, and mouse cables used for the KVM station. Connect the power adapter to
the receiver unit’s power port. Finally, connect the Transmitter’s RJ45 connector to
the receiver’s RJ45 connector using up to 1,000 feet of CATx cable.
NOTE: Distance will vary depending on resolution used