Toshiba Magnia Z300 Manuale Utente
System Configuration Setup
Configuring MegaRAID IDE
169
Delete Array (F5)
Press the <F5> key to delete a currently configured array. Use
arrow keys to go over to the array you want to delete and then
press <F5>.
arrow keys to go over to the array you want to delete and then
press <F5>.
CAUTION: Use this option with caution. When you delete an
array, you lose the array configuration and the data saved in
the array.
array, you lose the array configuration and the data saved in
the array.
Restore Old Configuration (F6)
Press the <F6> to restore the configuration that was there before
you entered the MegaRAID IDE setup utility.
you entered the MegaRAID IDE setup utility.
Edit Options (F7)
Press the <F7> key to set the options to enable/disable Drive Write
Cache, Boot Sector Virus Protection, DMA transfers, and Buzz-
ers. To select an option, press <F3>, move the cursor to the desired
option and press the spacebar. This puts a check by the option.
Press the <Enter> key to activate the new option.
Cache, Boot Sector Virus Protection, DMA transfers, and Buzz-
ers. To select an option, press <F3>, move the cursor to the desired
option and press the spacebar. This puts a check by the option.
Press the <Enter> key to activate the new option.
A status box for each item displays in the Physical Drives Infor-
mation section of the screen. The box shows whether the option is
on or off. The Write Cache displays WC-ON or WC-OFF, the
Virus Protection box displays VP-ON or VP-OFF, the DMA
Read/Write box displays DMA-ON or DMA-OFF, and the
Buzzer display BUZ-ON or BUZ-OFF. When you turn the option
on, the status box changes color, from red to green. The window
for the Write Cache, Virus Protection, DMA, and Buzzer options
is shown below.
mation section of the screen. The box shows whether the option is
on or off. The Write Cache displays WC-ON or WC-OFF, the
Virus Protection box displays VP-ON or VP-OFF, the DMA
Read/Write box displays DMA-ON or DMA-OFF, and the
Buzzer display BUZ-ON or BUZ-OFF. When you turn the option
on, the status box changes color, from red to green. The window
for the Write Cache, Virus Protection, DMA, and Buzzer options
is shown below.