Toshiba Magnia Z300 Manuale Utente

188

A: \NetWare

5 Press the <Enter> key to retrieve drivers contained in the 

floppy disk.

6 When the driver list appears, select the following driver.

Proceed with installing operation, following the instructions that 
appear on the screen.

Follow the procedure mentioned below:

1 Move the cursor to “Select additional or modify selected Disk/ 

LAN drivers” on the screen shown above with the arrow keys, 
and press the <Enter> key.

2 Insert the Adaptec Ultra160 ASPI & SCSI driver for NetWare 

created with the Toshiba Server Setup Tool in the floppy disk 
drive.

3 Select “Select an additional driver” first, and select “Install an 

unlisted driver <Ins>” next.

4 Press the <Enter> key to retrieve drivers contained in the 

floppy disk.

5 When the driver list appears, select the following driver.

6 Input slot Number “10011” to ADPT160M Parameters

Proceed with installing operation following the instructions that 
appear on the screen.

After selecting the driver following the procedure of the previous 
section “Selecting the SCSI Riser Card Controller driver,” follow 
the procedure mentioned below:

|| MEGAIDE.HAM || Netware NWPA HyperDisk HAM Driver ||

|| ADPT160.HAM || Adaptec Ultra160 ASPI & SCSI Driver