Tech4o Alti-Ski Manuale Utente

14

15

8.0 Temperature Mode - Display
• To view temperature mode, press the [m] 

button until the mode indicator displays 

T.

• In temperature mode the watch will 

display temperatures in the top row and 
home time, temperature, or run counter 
in the bottom row.

8.1 Temperature Mode - Setting
• In temperature mode, press and hold the 

[s/+] button for 2 seconds.  The ˚F or ˚C indicator will flash.

• Press the [o/-] button to select between ˚F or ˚C.
• Press the [o/o] button to confirm selection.
• At this time the bottom row will flash.
• Press the [o/-] button to select between home time, temperature, 

or run counter to be displayed in the bottom row. Press the [o/o] 
button to confirm selection.

8.2 Temperature Mode - Temperature Features
Current, Maximum, and Minimum Temperatures:
• In temperature mode, press the [o/-] button to access the 

maximum temperature reading since the setting was last reset.

• Press the [o/-] button again to access the minimum temperature 

reading since the setting was last reset.

• Both maximum and minimum temperature readings can be reset by 

pressing and holding the [s/+] button for 2 seconds while viewing 
either the maximum or minimum records respectively.

• Surrounding temperatures are generally 10 - 15˚F / 5 - 8˚C 

cooler than watch readings due to the effects of the wearer's body 
temperature.

• For more accurate readings, remove the watch from your wrist and 

allow 5-10 minutes for sensors to adjust. 

9.0 Altimeter Mode - Display
In altitude mode the watch will display 

altitude and barometric measurements 
in the top row and the current home 
time, current temperature, or run counter 
depending our your personal selection.

• To view Altimeter Mode, press the 
    [m] button until the mode indicator 
    displays A.