jWIN JC-CD260 Manuale Utente
USING THE RESET BUTTON
FLASHING
Press button with a thin, pointed object if unit is malfonctioning. Though not a normal
occurrence, the microprocessor which controls the operation of this unit can be affected
by electrostatic noise.
This generally is indicated by such symptoms as no power being supplied when you switch
the unit on, failure of buttons and controls, or an abnormal display.
Should this happen, press the reset button with a thin, pointed object to reset the microprocessor.
occurrence, the microprocessor which controls the operation of this unit can be affected
by electrostatic noise.
This generally is indicated by such symptoms as no power being supplied when you switch
the unit on, failure of buttons and controls, or an abnormal display.
Should this happen, press the reset button with a thin, pointed object to reset the microprocessor.
SPECIFICATIONS
FM SECTION
MW(AM) SECTION
Frequency Range : 87.5-107.9 MHz
Frequency Range : 530 - 1710 KHz
Channel Step : 200 Khz
Channel Step : 10 KHz
Intermediate Frequency : 10.7 MHz
Intermediate Frequency : 450 KHz
Usable Sensitivity : 33 dB
Usable Sensitivity : 33 dB
Image Rejection Ratio at 106KHz : >50 dB
Image Rejection Ratio : >50 dB
Signal to noise ratio : >60 dB
If Rejection Ratio : >50 dB
CD PLAYER SECTION
Signal to noise Radio : More than 60dB
Channel separation : More than 60dB
Frequency Response : 20Hz - 20KHz
Channel separation : More than 60dB
Frequency Response : 20Hz - 20KHz
GENERAL
Power Supply Voltage : DC 12 Volts Negative Ground
Speaker impedance : 4 - 8
Maximum Output Power : 15W x 4CH
Dimensions Chassis : 178(W) x 50 (H) x 160(D)mm
Speaker impedance : 4 - 8
Maximum Output Power : 15W x 4CH
Dimensions Chassis : 178(W) x 50 (H) x 160(D)mm
RESET
-- 8 --