Intel NetStructure 05-2450-001 Manuale Utente

13

3. Enter the number that corresponds to the license you want to activate. 

Details about the license you selected will appear so you can confirm that you really want to 
activate this license. Here is an example of what the details might look like.

Information from the file /usr/dialogic/data/1r1v0e0c0s0f1m_ver.xml :

Serial number :       VERIFICATION

MAC address :         *****************

License type :        Verification

Expiration date :     **********

PCD file name :       1r1v0e0c0s0f1m_ver.pcd

Feature description : Name - Quantity

                      Conferencing - 0

                      Enhanced RTP - 0

                      Multimedia - 1

                      RTP G.711 - 1

                      Speech Integration - 0

                      T.38 Fax Termination - 0

                      Voice - 1

Do you want to activate this license? [y/n] : y

4. Enter y to activate this license or n to select another one.

If you select y, a message will appear to confirm that the license has been activated.

5. As instructed on the screen, press Enter to continue. The License Manager menu will 

reappear.

Note: You must adjust the HMP IP address (License Manager menu choice 5) if you plan to 

use a different network card for IP telephony than the licensing network card. Refer to 
the Intel NetStructure Host Media Processing Release 1.5 for Linux License Manager 
Administration Guide for more details about changing the HMP IP address.

6. If you have activated a license, you can exit from the License Manager menu. If you selected 

SNMP Component Manager during the first part of the install, you will get some SNMP-
related prompts. If you did not select SNMP Component Manager, skip the next two steps.

7. The first SNMP-related prompt that appears is the following:

Would you like to configure SNMP on this system (y/n, default=n)?

8. If you don’t want to configure SNMP, enter n and skip to the next step. 

If you do want to configure SNMP, enter y. The following information and prompt will appear:

Intel SNMP Agents Configuration Tool

(C)2000-2005 Intel Corp.

You may choose to manually configure all communities and trap sinks(destinations), or you 

may select an automatic configuration.  If the automatic configuration is chosen, this tool 

will create the required 'admin' community and prompt you to enter trap sinks.  Selecting 

the manual configuration allows you to easily create custom communities and configure trap 

sinks.  If the 'admin' community does not exist yet, it may be created the same way as 

other communities using the manual configuration.  Note, the 'admin' community MUST be 

assigned read-write priviledges or else abnormal behavior will occur when the Intel SNMP 

Agents are loaded.

Would you like to proceed with automatic configuration? (no will select manual 

configuration) (y)es or (n)o?

Enter y for automatic configuration or n for the opportunity to perform manual configuration 
as described in the on-screen text shown above. If you enter y, the following will appear: