GE X-9 Manuale Utente

The master fader is used to control 
the overall level of the mixed signal 
output from the X-9.

 “Signal flow” on page 15 for 

details of how this works in conjunc-
tion with the input, etc., signals in 
the X-9.

These faders adjust the levels of the programs after 
they have been equalized and before they are sent to 
either the cross-fader or to the master fader.

The fader curve and fader direction can also be set, 
and fader program start can be carried out.

 “About programs” on page 14 for details of how 

programs and signals interact.

 “Faders” on page 21 for further details about 

fader settings.

These controls affect the assignment 
and the on/off status of any external 
effect connected to the X-9.

 “External effects” on page 13 for details of how 

to connect and use an external effect processor with 
the X-9.