Epson Stylus Parts CX5800F Manuale Utente

Epson Stylus CX5800F

20

8/05

8. Before you open the new ink cartridge package, shake it 

four or five times. Then remove it from the package.

Caution: 
Do not touch the green chip on the front of the cartridge. This can 
damage the ink cartridge.

9. Place the new ink cartridge into the cartridge holder and 

push it down until it clicks into place.

10. Replace any other cartridges that need to be replaced. 

11. Close the ink cartridge cover and press it until it clicks into 

place. 

12. Close the scanner. 

13. Press the 

OK

 button. The Epson Stylus CX5800F begins 

charging ink and 

Charging

 appears on the display. 

Charging takes about one minute. When it’s finished, 

5.Replace Cartridge

 appears on the display.

Caution: 
Never turn off the Epson Stylus CX5800F while Charging 
appears on the display or you’ll waste ink.

Note:
If you see an ink cartridge error message on the display, the ink 
cartridge may not be installed correctly. Press the OK button and 
reinstall the ink cartridge until it clicks into place.

14. Press the y

Cancel/Back

 button until you return to the first 

screen.

If your printouts look grainy or blurry, or you see light or dark 
horizontal banding, you may need to align the print head.

Note:
Banding may also occur if your cartridges are low on ink or you need 
to clean the print head.

You can also align the print head using the control panel buttons. 
Press the Setup button, select 6.Head Alignment, and follow the 
instructions on the display.

Start

Color

OK