Cisco Systems 3.2 Manuale Utente
6-9
Cisco Wireless LAN Controller Configuration Guide
OL-8335-02
Chapter 6 Configuring WLANs
Configuring Wireless LANs
Configuring QoS Enhanced BSS (QBSS)
You can enable QBSS in these two modes:
•
Wireless Multimedia (WMM) mode, which supports devices that meet the 802.11E QBSS standard
•
7920 support mode, which supports Cisco 7920 IP telephones on your 802.11b/g network
QBSS is disabled by default.
Enabling WMM Mode
Enter this command to enable WMM mode:
config wlan wmm {disabled | allowed | required} wlan-id
•
The allowed option allows client devices to use WMM on the wireless LAN.
•
The required option requires client devices to use WMM; devices that do not support WMM cannot
join the wireless LAN.
join the wireless LAN.
Note
Do not enable WMM mode if Cisco 7920 phones are used on your network.
Table 6-1
Access Point QoS Translation Values
AVVID 802.1p UP-Based
Traffic Type
Traffic Type
AVVID IP DSCP
AVVID 802.1p UP
IEEE 802.11e UP
Network control
–
7
–
Inter-network control
(LWAPP control,
802.11 management)
(LWAPP control,
802.11 management)
48
6
7
Voice
46 (EF)
5
6
Video
34 (AF41)
4
5
Voice control
26 (AF31)
3
4
Background (Gold)
18 (AF21)
2
2
Background (Gold)
20 (AF22)
2
2
Background (Gold)
22 (AF23)
2
2
Background (Silver)
10 (AF11)
1
1
Background (Silver)
12 (AF12)
1
1
Background (Silver)
14 (AF13)
1
1
Best Effort
0 (BE)
0
0, 3
Background
2
0
1
Background
4
0
1
Background
6
0
1