Cisco Systems 3.2 Manuale Utente
10-5
Cisco Wireless LAN Controller Configuration Guide
OL-8335-02
Chapter 10 Configuring Mobility Groups
Overview of Mobility Groups
Note
Both inter-controller roaming and inter-subnet roaming require the controllers to be in the same mobility
group. See the next two sections for a description of mobility groups and instructions for configuring
them.
group. See the next two sections for a description of mobility groups and instructions for configuring
them.
Overview of Mobility Groups
A set of controllers can be configured as a mobility group to allow seamless client roaming within a
group of controllers. By creating a mobility group, you can enable multiple controllers in a network to
dynamically share information and forward data traffic when inter-controller or inter-subnet roaming
occurs. Controllers can share the context and state of client devices and controller loading information.
With this information, the network can support inter-controller wireless LAN roaming and controller
redundancy.
group of controllers. By creating a mobility group, you can enable multiple controllers in a network to
dynamically share information and forward data traffic when inter-controller or inter-subnet roaming
occurs. Controllers can share the context and state of client devices and controller loading information.
With this information, the network can support inter-controller wireless LAN roaming and controller
redundancy.
Note
Clients do not roam across mobility groups.
Figure 10-4 A Single Mobility Group