Avaya Media Gateway G700 Manuale Utente

After installing new software and new Authentication file, you will need to use a static craft 
password to access the customer’s system. This static password will enable you to log in to the 
S8300 with a direct connection to the Services port without the ASG challenge/response. To 
obtain the static password, call the ASG Conversant number, 800-248-1234 or 720-444-5557 
and follow the prompts to get the password. In addition to your credentials, you will need to 
enter the customer’s Product ID or the FL or IL number.

Business Partners must use the dadmin password. Call 877-295-0099 for more information.

When you arrive on-site, you must perform the following tasks in preparation for the upgrade to 
release 3.1:

●

●

●

●

●

●

To perform the installation and upgrade procedures you will need to connect your laptop to the 
S8300 Services port using a crossover cable. You will use both Telnet and the Maintenance 
Web Interface to perform the procedures. 

For a direct connection to the S8300 Services port, your laptop must be properly configured. 
See 

1. Click Start > Run to open the Run dialog box.

2. Type telnet 192.11.13.6 and press Enter.

3. Log in as craft or dadmin. 

Accept the defaults for Suppress Alarm Origination (y) and Terminal Type (vt100). At this 
point, you get the bash prompt and can enter CLI commands.