Avaya Media Gateway G700 Manuale Utente
Issue 9.1 June 2006
293
Chapter 6: Upgrading an existing S8300B to R3.1
using the Upgrade Tool
This section covers the procedures to use the Upgrade Tool to upgrade the following:
●
The software on an installed Avaya S8300B Media Server and its LSPs, from a 2.x or 3.0
release to 3.1.
release to 3.1.
●
The firmware on an installed Avaya G700 Media Gateway.
!
Important:
Important:
This chapter assumes that the currently installed S8300 is version B running
Communication Manager release 2.1 or greater. If the currently installed S8300 is
version A, follow the upgrade procedures in
Communication Manager release 2.1 or greater. If the currently installed S8300 is
version A, follow the upgrade procedures in
. If the S8300 is version B, but is running
release 2.0 of Communication Manager, follow the upgrade procedures in
!
Important:
Important:
These procedures assume that you are upgrading an S8300 primary controller
and/or any remote LSPs connected to the primary controller. If you are upgrading
an LSP by itself locally, you cannot use the Upgrade Tool. Instead, you must
follow the procedures in
and/or any remote LSPs connected to the primary controller. If you are upgrading
an LSP by itself locally, you cannot use the Upgrade Tool. Instead, you must
follow the procedures in
.