Avaya Media Gateway G700 Manuale Utente

This section provides information on connecting call detail recording (CDR) equipment.

The interface between an Avaya media server and CDR equipment is a Processor Ethernet 
Connection. 

CDR equipment connects to one of the two IP connections (EXT 1 or EXT 2) on the front of 
the G700 or G350 Media Gateway. As with C-LAN connections, the CDR adjunct may be a 
terminal server or a CDR application using RSP.

Note:

A printer or customer premises equipment (CPE) can also be used as the output 
receiving device. Please see  on page 426 of this book for instructions on using a 
printer.

Note:

To send CDR data using a processor Ethernet interface to a device on the LAN/
WAN, you have the option to enable/disable RSP.

1. Setup the CDR adjunct to be ready to collect CDR data. 

Record the IP address and the port number of the CDR adjunct, which could be a terminal 
server or a CDR application that uses RSP. 

If the CDR adjunct is an application that uses RSP, start the application to listen for a client 
connection at the port.

2. Access the IP Services screen in Communication Manager (see 

on page 411), and do the following:

a. In the Service Type field, enter CDR1 or CDR2. 

b. In the Local Node field, enter procr.

c. The Local Port field defaults to 0 for all client applications. 

You cannot make an entry in this field.