Avaya Media Gateway G700 Manuale Utente

Pagina di 768
Administer Communication Manager
Issue 9.1 June 2006
575
 
Note:
Note:
For information on installing the CLAN boards on the S8400, S8500, or 
S8700-series Media Server port networks and complete information on installing 
an S8400, S8500, or S8700-series Media Server, see the Installation 
documentation on the Documentation for Avaya Communication Manager, Media 
Gateways and Servers CD
, 03-300151.
Assigning Node Names and IP Addresses for the C-LANs and LSPs
Note:
Note:
The CLAN boards must be TN799DP running version 5 or greater firmware. Be 
sure to check the firmware version for these boards on the S8400, S8500, or 
S8700-series Media Server. For information on how to upgrade the firmware on 
the C-LAN circuit pack, please see the "Upgrading firmware on programmable 
TN circuit packs," in Upgrading, Migrating, and Converting Avaya Media Servers 
and Gateways
03-300412.
To assign node names and IP addresses
1. At the SAT prompt, type change node-names ip to open the Node Names screen. 
Example Node Names Screen
2. Enter the name and IP address for the C-LANs and LSPs.
3. Press F3 (Enter) when complete.
change node-names ip
Page 1 of 1
                           
IP NODE NAMES
Name              IP Address          Name                IP Address
default_________
0__.0__.0__.0__ _______________
___.___.___.___
node-1-clan
 __  192.168.1 _.124 
_______________    ___.___.___.___
node-2-clan 192.168.1 _.97_
_______________    ___.___.___.___
node-10-lsp
192.168.1 _.50_
_______________    ___.___.___.___
node-11-lsp
192.168.1 _.51_
_______________    ___.___.___.___
__________ 
___.___.___.  _
_______________    ___.___.___.___
__________ 
___.___.___.  _
_______________    ___.___.___.___
__________ 
___.___.___.  _
_______________    ___.___.___.___