Avaya Media Gateway G700 Manuale Utente

CAUTION:

This upgrade procedure, including remastering the hard drive on the S8300, 
requires a service interruption of approximately 4 hours, or up to 6 hours if IA770 
is being used.

This section describes the procedures for upgrading the S8300A Media Server from a pre-2.2 
release of Communication manager to release 3.1.

Upgrading an S8300 to release 3.1 requires removing the S8300A and replacing it with an 
S8300B. The new S8300B should have the remastering program (RP) software installed on its 
hard drive. The remastering program remasters the hard drive and installs the R 3.1 
Communications Manager software. These procedures are described in this section.

This section covers:

●

●

●

●

A pre-upgrade service pack is required only if the current software is between 1.2.0 and 1.3.0.

If the current software release is between 1.1.0 and 1.1.9, or between 2.0.0 and 2.0.9, skip this 
service pack installation procedure and go to 

If the current software release is 1.3.1, skip this service pack installation procedure and go to 

on page 618. 

Note:

Typically, any existing service pack(s) should be removed before installing a new 
service pack. However, removing existing service packs is not necessary for this 
procedure.

1. Make sure the software CD is in the CD-ROM drive of your laptop.

2. On the Maintenance Web Interface, under Miscellaneous, click Download Files.