Avaya Media Gateway G700 Manuale Utente

1. Make sure your laptop meets the hardware and software requirements.

2. Plug an Ethernet crossover cable (MDI to MDI-X) into the 10/100 BaseT Ethernet network 

interface card (NIC) on your laptop. 

- Crossover cables of various lengths are commercially available. 

- See 

 for pinout connections if needed. Crossover of the transmit and receive pairs 

(as shown) is required.

3. Connect the other end of the crossover cable to the Services port on the front of the S8300.

4. If your laptop is configured with the correct network settings, you can now open your 

Internet browser or start a Telnet session and log in. When accessing the server from a 
directly connected laptop, always type the following IP address in the browser's Address or 
Location field to access the server: 192.11.13.6 

To configure a G700 that does not have an S8300, you may need to set up a direct connection 
from your laptop’s serial port to the G700 Console (serial) port.

8

8

7

7

6

2

5

5

4

4

3

1

2

6

1

3