Avaya Media Gateway G700 Manuale Utente

The steps to manually upgrade an S8300 configured as an LSP are the same as the steps to 
upgrade an S8300 configured as the primary controller, with the following additional 
considerations:

●

The version of Communication Manager running on the LSP must be exactly the same as, 
or a later version that is compatible to, the version running on the primary controller. 

●

If upgrading both the primary controller and the LSP to the same release, you must 
upgrade the LSP first. Then, with Communication Manager turned off on the LSP, you 
upgrade the primary controller. 

During an upgrade, any data in the /tftpboot directory is overwritten with new software and 
firmware. If the system was using the http or tftp capability for 4600-series phone firmware 
downloads and configuration updates, the firmware and 4600-series phone configuration file 
are overwritten. 

You must retrieve the 46xx firmware (the 46xx .tar file, for example 
46xxH323_cm2_2_wi1_15_ipt2_2_111405.tar) from the Avaya Downloads Web site and 
download the 46xx firmware file to the server after the upgrade. However, you can save a copy 
of the 46xx configuration file before the upgrade and copy it back into the /tftpboot directory after 
the upgrade. See the following:

●

●

●

The major tasks to upgrade the S8300B to release 3.1 and upgrade the G700 firmware are:

●

●

●

●

●